After a day or two, the majority of Apple Watches will die. However, if yours is dying even faster, something could be draining your battery, such as background apps, Hey Siri, or other features. Here are seven simple solutions to the problem of your Apple Watch battery dying too quickly.
1. Turn Off the Display and Set the Alarm
A quicker drain on your Apple Watch battery can be the result of a brighter screen or a longer waking time. Power savings and less strain on the eyes are two benefits of lowering the screen’s brightness and wake time. If you want to extend the life of your battery by a day, try this simple approach.
Navigate to your Apple Watch’s Settings > Display & Brightness to accomplish this. You may shorten the wake time and lower the brightness slider. To prevent the screen from turning on without pressing the Digital Crown, you can also disable Wake on Wrist Raise.
2. Disabling Background Apps
The majority of applications keep updating data when you’re not looking. Most won’t have any effect on the battery life, but a few could. You can conserve power by disabling background app refresh, and you may choose which applications to disable or all of them.
To refresh the background app on your iPhone, open the Apple Watch app and go to My Watch > General. Disable it entirely or disable it for specific apps you don’t want to be running in the background.
3. Modify Workout Settings
Since your Apple Watch constantly tracks your heart rate, GPS, and other activity data, workouts drain the battery faster. This may significantly reduce battery life if you engage in frequent physical activity. The good news is that you can keep tabs on your exercises without worrying about your battery dying. While Low Power Mode continues to record your activities, it disables several functionalities, such as the Always-On display.
Select Low Power Mode from the Apple Watch’s Settings menu, then choose Battery. To further reduce battery consumption during lengthy workouts, you can go to the Workout settings and enable Low Power Mode along with Fewer GPS and Heart Rate Readings.
4. Disable “Hey Siri”
Over time, your Apple Watch’s battery life will deplete due to its persistent state of readiness for the “Hey Siri” command. Turning off Siri might help your watch last longer if you don’t use it regularly. Pressing and holding the Digital Crown will still activate Siri whenever you need it.
Make sure that “Listen for ‘Hey Siri'” is off on your Apple Watch by going to Settings > Siri.
5 Activate the Bluetooth.
If you disable Bluetooth on your iPhone, your Apple Watch will continue to try to connect, draining your battery more quickly. Turning on Bluetooth ensures a constant connection and reduces battery consumption during data syncing on your watch.
Open the Settings app on your iPhone, then go to Bluetooth, and toggle it on.
Step 6: Update the WatchOS
Battery drain might occur due to software difficulties, but luckily, Apple usually fixes these concerns via updates. The greatest updates, bug fixes, and battery life optimizations are available when you update your watchOS.
Find Software Update under the General section of your iPhone’s Settings. Before updating, make sure your Apple Watch is at least 50% charged by placing it on a charger.
Step 7: Verify the State of the Battery
Regardless of how well your Apple Watch uses its power, it won’t last long if the battery isn’t good. Knowing the battery’s present condition might help you decide whether to replace it, even if its capacity will naturally drop with time.
Get to the Apple Watch’s Battery Health settings by navigating to Settings > Battery. It is advised to replace the battery via Apple’s repair service if the maximum capacity falls below a certain level.
Disclaimer:
This article is for informational and educational purposes only. The tips and solutions mentioned may not work for every device or situation. Apple Watch, watchOS, Siri, and other product names mentioned are trademarks of their respective owners.